Chlorine Scrubber with Sulfuric Acid Solution
Also known Chlorine Drying Tower with Sulfuric Acid Solution. Gas with 98% Chlorine at 57F is to be absorbed in Sulfuric Acid Solution. Customer wanted to increase the capacity of the existing Chlorine Drying Tower and did not have any previous data available. MACH Engineering Proposed to regenerate all data for existing tower and redesign new towers for future systems with increased capacity. Simulation results shows that 2 stages are required. Bottom stage is with 15 ft of packing height of 3.5” Tri-Packs in PVDF (Kynar™) and top stage is with 5 Tunnel Trays in Plastics. Tower diameter was 6 ft. Stage efficiency was calculated and Sensitivity Analysis was done with multiple cases for current design with different flow rates.